Breakdown characteristics in pulsed-driven dielectric barrier discharges: influence of the pre-breakdown phase due to volume memory effects

Abstract

The pre-phase of the breakdown of pulsed-driven dielectric barrier discharges (DBDs) was investigated by fast optical and electrical measurements on double-sided DBDs with a 1 mm gap in a gas mixture of 0.1 vol% O2 in N2 at atmospheric pressure. Depending on the pulse width (the pause time between subsequent DBDs), four different breakdown regimes of the following discharge were observed. By systematically reducing the pulse width, the breakdown characteristics could be changed from a single cathode-directed propagation (positive streamer) to simultaneous cathode- and anode-directed propagations (positive and negative streamer) and no propagation at all for sub-μs pulse times. For all cases, different spatio-temporal emission structures in the pre-phase were observed. The experimental results were compared with time-dependent, spatially one-dimensional fluid model calculations. The modelling results confirmed that different pre-ionisation conditions, i.e. considerably high space charges in the volume created by the residual electrons and ions from the previous discharge, are the reason for the observed phenomena.