Abstract
AbstractRealizing the joining of SiC ceramic to Al0.3CoCrFeNi high‐entropy alloy is a technical interest for aviation, aerospace, and nuclear energy industry. In this study, the reliable brazing of SiC and Al0.3CoCrFeNi high‐entropy alloy was realized by inactive AgCu filler, which lays the foundation for the following research on ceramic‐high‐entropy alloy dissimilar joining. The interfacial microstructure was characterized by a scanning electron microscope and transmission electron microscope in detail, and the influence of Al0.3CoCrFeNi dissolution on interfacial reactions was studied. The effect of brazing temperature on microstructure evolution and mechanical properties was discussed. The results indicated that elements Ni, Fe, Co, and Cr from Al0.3CoCrFeNi were crucial for the joint formation. (Ni, Fe, Co)2Si + graphite + Cr23C6/(Cr, Fe)23C6 + (Ni, Fe, Co)2Si formed adjacent to SiC and (Fe, Co, Cr, Ni)–Si silicide + Cu(s,s) + Cu–Ni–Al‐rich phase formed next to Al0.3CoCrFeNi. The reaction layers on SiC side thickened and the morphology of (Fe, Co, Cr, Ni)–Si‐ and Cu–Ni–Al‐rich phase experienced distinct changes with the increasing temperature. The highest strength of ∼32.2 MPa was obtained at 850°C for 10 min.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
