Boundary Tribological Behaviors of Untreated and Surface-Modified M50 Steel Lubricated by Fuel JP-10

Abstract

ABSTRACTTo explore the possibility of using advanced surface engineering techniques (ASETs) to solve the wear problems caused by the poor lubricity of pure, low-viscosity aviation fuel JP-10, polished M50 bearing steel sample surfaces were treated with nitrogen ion implantation, TiAlN coating deposition, and Ta coating deposition followed by high current pulsed electron beam (HCPEB) irradiation, respectively. Boundary tribological behaviors of these ASET-treated and untreated steel samples sliding in pure JP-10 against a Si3N4 ball (ball-on-disc model) were investigated under 2.0 GPa in the atmosphere and the friction tests indicated that significant, reductions, although to different extents, in friction and wear were achieved by these modified surfaces. Simultaneously considering the tribological performance and potential pollution caused by wear debris to JP-10, HCPEB-treated Ta coating with a lowest average friction coefficient of 0.11 and a specific wear rate of around zero was the fittest to offset the inadequate lubricity of JP-10 itself under the laboratory condition.