Abstract
BaSi2 films were fabricated on textured Si(001) substrates that consisted of {111} facets using molecular beam epitaxy. The light-trapping effect of these films and their performance when incorporated into solar cells were measured. X-ray diffraction and reflectivity measurements showed that the BaSi2 films were grown epitaxially on the textured Si(001) substrate and confirmed the light-trapping effect. The critical thickness over which BaSi2 relaxes increased from approximately 50 to 100nm when comparing the BaSi2 films on a flat Si(111) substrate and the textured substrate, respectively. p-BaSi2/n-Si solar cells were fabricated with varying BaSi2 layer thickness and with hole concentrations in the range between 2.0×1018 and 4.6×1018cm−3. These cells exhibited a maximum energy conversion efficiency of 4.62% with an open-circuit voltage of 0.30V and a short-circuit current density of 27.6mA/cm2 when the p-BaSi2 layer was 75nm-thick. These results indicated that the use of BaSi2 films on textured Si(001) substrates in solar cells shows great promise.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.