Boron removal by liquid‐phase polymer‐based retention technique using poly(glycidyl methacrylate N‐methyl D‐glucamine)

Abstract

AbstractThe removal of boron was analyzed by liquid‐phase polymer based retention (LPR) technique using washing and enrichment method. The extracting reagents were water‐soluble polymers (WSPs) containing quaternary ammonium salts and N‐methyl‐D‐glucamine (NMG) groups. The removal experiments of boron using the washing method were conducted at 1 bar of pressure by varying pH, polymer:boron molar ratio, and concentrations of interfering ions (chloride and sulfate). The results showed higher retention capacity for boron (60%) at pH 10 with the polymer containing NMG group. The optimal polymer:boron molar ratio was 40 : 1. Selectivity experiments showed that the presence of interfering ions did not affect the boron removal capacity. The maximal boron retention capacity was determined by the enrichment method, obtaining a value of 12 mg B/g‐polymer. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013