Abstract
The eutectic high-entropy alloys have shown promising mechanical behaviors while their softening at elevated temperatures is still a challenge. Generally, the boundaries are the weak parts to be strengthened with increased temperatures in eutectic high-entropy alloys. Here, we found that the minor addition of boron in Ni30Co30Cr10Fe10Al18W2 eutectic high-entropy alloy can significantly strengthen the FCC grain boundaries and the FCC/B2 phase boundaries at elevated temperatures. A remarkable tensile yield strength over 581 MPa with elongation of 71 % at 800 °C is achieved with minor boron addition, corresponding to a 45 % increase in yield strength and 129 % improvement in ductility compared with the boron-free counterpart. Accompanied by the boron-strengthened phase boundary, sustainable dynamic recovery occurs in the FCC and B2 phases during high-temperature tensile testing, ensuring excellent ductility. Moreover, the benchmark test indicates that the strengthening effect of boron and borides on the boundaries contributes up to 166 MPa to the yield strength of eutectic high-entropy alloy at 800 °C. These findings shed light on the development of high-temperature eutectic high-entropy alloys with a microalloying strategy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.