Boosting the triboelectric performances of biowaste chitosan keratin triboelectric nanogenerator using carbon composite film as charge storage and charge recombination blocking intermediate layer

Abstract

Environmental conservation efforts are promoting energy-generation technologies that avoid the use of highly polluting fuels and promote the reuse of waste materials. Advances in triboelectric nanogenerators (TENGs) have led to the progress in harvesting energy from ambient mechanical sources and powering small devices and sensors while being compact, flexible, biocompatible, and eco-friendly. Nevertheless, the practical applications of TENG have limitations. Therefore, the development of TENG with excellent tribological performance, eco-friendliness, and low cost is crucial. Consequently, an environmentally friendly, inexpensive TENG device with outstanding triboelectric performance was designed using keratin-enhanced chitosan as a tribo-positive material, a carbon film as an intermediate layer, and polytetrafluoroethylene as a triboelectric negative material. The device was purposely designed to simultaneously play a role in waste treatment and efficient green energy harvesting. Therefore, keratin was extracted from recycled fur, and a carbon film was selected to enhance the triboelectric performance because of its excellent electrical conductivity and dielectric constant. The triboelectric properties of a chitosan keratin intermediate layer (CKI)-TENG were systematically investigated. Practical applications of the CKI-TENG in charging electronic devices and waste-noise harvesting were also studied. The developed CKI TENG exhibited outstanding triboelectric performance compared to a TENG device without an intermediate layer. Particularly, the charge transfer, output voltage and power density was improved by 19%, 46%, and 60%, respectively, compared to the output of the chitosan-keratin (CK) TENG device. It also exhibited outstanding cyclic and charging-discharging stabilities. In addition, the power density of the developed CKI TENG was higher than that of previously reported TENG devices. Thus, it can play a significant role in green and clean energy generation and the utilization of the harvested energy in practical applications, such as biomedical sensors, charging electronic devices, smart textiles, and sensors.