Abstract
State‐of‐the‐art air electrodes such as (La,Sr)MnO3 (LSM) and La0.6Sr0.4Co0.2Fe0.8O3+δ (LSCF) for solid oxide cells (SOCs), suffer from sluggish oxygen exchange kinetics and high activation energy at reduced temperatures, thus dramatically decreasing their performance. Herein, we demonstrate a simple strategy to boost the activities of these conventional air electrodes. Praseodymium oxide nano-catalysts were in-situ homogeneously incorporated into LSM, LSCF, and La0.6Sr0.4CoO3 (LSC) air electrodes during the SOC startup via a facile one-step urea-based infiltration method. The polarization resistance of LSM can be reduced to<1/10 of its original value, while LSCF and LSC can be reduced to about 1/2 – 1/4 of their original resistances at 600–800 °C. This approach dramatically enhances the cell performances, typically increases the SOFC power outputs and electrolysis current densities (at 600 °C) by>5 times for LSM, more than two times for LSCF, and approximately two times for LSC. Furthermore, the infiltrated LSC electrode show good durability of 132 h at 700 °C under electrolysis mode. This work demonstrates a facile and cost-effective way to boost the performance of conventional air electrodes for SOC and is also applicable to the studies involving similar oxygen exchange reactions for various energy conversion and storage systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.