Boosting the capacity and stability of Na3V2(PO4)2F3-2xO2x microspheres, using atomic layer deposition of artificial CEI

Abstract

Phosphate-based materials [e.g. Na3V2(PO4)2F3-2xO2x; (NVPFO2x;0 < x < 1)] are regarded as a promising intercalation cathodes for Sodium-ion batteries (SIBs) due to their high reversible specific capacity and stability. However, so far only 2 Na ion were demonstrated to be active in these polyanionic cathodes, which limit their capacity. Herein we provide a strategic approach towards electrochemical activation of a 3rd Na ion, which leads to higher capacity, and preserves structural integrity. We synthesize and study a series of NVPFO2x (0 < x < 1) with well-controlled surface morphology and vanadium oxidation state, and study the dependence of the electrochemical behavior on the various composition and morphology. The optimized NVPFO cathode exhibited highest initial specific discharge capacity (131 mA h g−1) indicating the activation of 3rd Na ion. Nevertheless, the material suffers rapid capacity fading within ~50 cycles. We demonstrate how this instability is suppressed profoundly through the formation of a thin artificial cathode electrolyte interface (CEI) layer of TiO2 (ca. 2 nm) on the surface of NVPFO by atomic layer deposition (ALD). This TiO2 coating enabled even further extraction of sodium through higher voltage domain, but more importantly, it facilitated excellent long-term stability over 200 cycles. The structural stability of the cathode material was revealed by post cycling HRSEM, XPS, and XRD study. All these studies demonstrate that the thin TiO2 layer effectively contributes to formation of a robust CEI layer, diminishes the parasitic reaction on the electrode surface, reduces carbonate formation, and restricts the electrolyte decomposition.