Boost-Derived Hybrid Converter With Simultaneous DC and AC Outputs

Abstract

This paper proposes a family of hybrid converter topologies which can supply simultaneous dc and ac loads from a single dc input. These topologies are realized by replacing the controlled switch of single-switch boost converters with a voltage-source-inverter bridge network. The resulting hybrid converters require lesser number of switches to provide dc and ac outputs with an increased reliability, resulting from its inherent shoot-through protection in the inverter stage. Such multioutput converters with better power processing density and reliability can be well suited for systems with simultaneous dc and ac loads, e.g., nanogrids in residential applications. The proposed converter, studied in this paper, is called boost-derived hybrid converter (BDHC) as it is obtained from the conventional boost topology. The steady-state behavior of the BDHC has been studied in this paper, and it is compared with conventional designs. A suitable pulse width modulation (PWM) control strategy, based upon unipolar sine-PWM, is described. A DSP-based feedback controller is designed to regulate the dc as well as ac outputs. A 600-W laboratory prototype is used to validate the operation of the converter. The proposed converter is able to supply dc and ac loads at 100 V and 110 V (rms), respectively, from a 48-V dc input. The performance of the converter is demonstrated with inductive and nonlinear loads. The converter exhibits superior cross-regulation properties to dynamic load-change events. The proposed concept has been extended to quadratic boost converters to achieve higher gains.