Abstract
A biomimetic method was used to promote bioactivity on zirconia/alumina composites. The composites were composed of 80 vol% Mg-PSZ and 20 vol% Al2O3. Samples of these bioinert materials were immersed in simulated body fluid (SBF) for 7 days on either a bed of wollastonite ceramics or bioactive glass. After those 7 days, the samples were immersed in a more concentrated solution (1.4 SBF) for 14 days. Experiments were also performed without using a bioactive system during the first stage of immersion. A bone-like apatite layer was formed on the surface of all the materials tested, using wollastonite the bioactive layer was thicker and its morphology was close to that observed on the existing bioactive systems. A thinner apatite layer consisting of small agglomerates was obtained using bioactive glass. The thickness of the ceramic layers was within the range of 15 to 30 microm.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Materials Science: Materials in Medicine
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
