Bone response to physical‐vapour‐deposited titanium dioxide coatings on titanium implants

Abstract

The aim of this study was to investigate the correlation between coating thickness and the crystal structure of physical-vapour-deposited (PVD) titanium dioxide coatings, and to evaluate their in vivo biocompatibility. The PVD TiO 2 coatings of different thickness were deposited on machined titanium grade 2 screw-shaped implants. Non-coated titanium implants were used as controls. Coating properties such as thickness, crystal structure, coating morphology and roughness were characterized. Forty-eight implants were placed randomly into both tibias of 16 rats. The animals were euthanized 7 and 28days postsurgery and block biopsies were prepared for histology, histomorphometry and SEM analysis. The thicknesses of the PVDTiO 2 coatings were 120 and 1430nm respectively. Histologically, new bone formed on all implant surfaces. The mean percentage of newly formed bone in contact with the implant (BIC) was significantly higher at early healing time (7days) for the 120nm thick PVD coating (39±14%) than for both the 1430nm thick PVD coating (22±10%) (P=0.043) and the machined surface (22±9%) (P=0.028). This difference was no longer evident after 28days (P=0.867). Bone formation and bone-to-implant contact are achieved to the same degree for TiO 2 surface modifications prepared by a PVD process as clinically used, machined titanium. Furthermore, a relatively thinner PVD coating promotes a higher degree of bone apposition shortly after implantation, thereby providing rationales for exploring the potential clinical use of these modifications.