Abstract
ABSTRACTThe bonding of layers of silicone elastomers during the manufacturing of microfluidic devices is often accomplished using plasma oxidation. The process can be costly, may require a clean room and materials that ensure the flatness of the bonding layers and, as a consequence of hydrophobic recovery, can lead to high variability in the degree of adhesion. As importantly, the process precludes incorporation of chemical functionalities that work as anchors to immobilize biomolecules within the microfluidic channel. We hypothesized that it would be possible to fabricate microfluidic channels using the Huisgen 1,3‐dipolar cycloaddition of azides to alkynes to crosslink silicones and form PDMS elastomers and, in a subsequent step, bond one PDMS layer to another simply by heating, with the added advantage of producing microfluidic channels with embedded chemical functionalities. After thermal bonding, the microfluidic devices underwent cohesive failure (rupture of the elastomer layer) at ∼145 kPa during pressure tests, but did not exhibit adhesive failure (delamination), showing that the azide–alkyne reaction provides a strong bond between elastomer layers. Furthermore, the internal microfluidic channel surfaces retained alkyne and azide functionality during the process, as shown by the grafting of one or more fluorescent dyes, through Huisgen cyclization. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018, 56, 589–597
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have