Abstract
This paper presents an experimental study on the bond behaviour of sand-coated basalt fibre reinforced polymer (BFRP) bars and conventional steel bars of 10mm- diameter. The bond strength of these bars were determined according to ASTM D7913/D7913M-14 standards. The pullout specimens consisted of BFRP bars embedded in concrete cubes (200mm on each side) with the compressive strength of 40MPa were constructed. The pullout test results contain the bond failure mode, the average bond strength , the slip at the free and loaded end, and the bond stress-slip relationship curves.The test results showed that the bond strength of sand-coated BFRP bars was about 70% that of the steel bars.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have