Abstract
In this study, the bond performance between fibre-reinforced polymer (FRP) bars and concrete was investigated by means of forty-eight pull-out tests. The influences of the diameter, type, and surface treatment of the FRP bars were considered. Two failure modes, including the pull-out mode and concrete splitting, were observed. The bond mechanism, bond strength, and bond stress–slip curve were discussed. It was found that (1) The force transfer mechanism of FRP bars with sand coating was mainly controlled by friction, while that of bars with helical wrapping or screw thread was mainly controlled by mechanical interlocking. (2) Carbon fibre reinforced polymer (CFRP) bars and a helical wrapping or screw thread surface treatment could improve the bond strength. (3) The bond stress–slip curve of FRP bars with sand coating showed a very steep characteristic at the initial micro-slippage segment, while that of bars with helical wrapping or screw thread exhibited a periodic variation. Two new bond stress–slip constitutive models were proposed. Compared with the existing models, the proposed models had higher fitting accuracy and universal applicability for the whole bond stress–slip curve. Finite element (FE) models were established and verified. Based on the FE results, a formula to estimate the anchorage length of FRP bars was proposed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
