Abstract
As the consumer enters his/her height and weight the BMI of the person is calculated. If the BMI indicates that the person is fit, then the machine makes an ideal health drink with all nutrient content. If the BMI of the person indicates he/she is skinny or obese the combinations of the drink mixes vary accordingly. Once the BMI is calculated, a pump connected to a water sump is activated and it allows some amount of water to the mixing container. The mixes are allowed to fall through a screw conveyor to maintain constant discharge irrespective of the amount of the mix in the container. The amount of mix to be discharged is controlled by a PLC which is already programmed using Ladder Logics. Timers are used in the program for exact measurement. Then the motors attached to the screw conveyors start working for a certain period of time as programmed and allow the mixes to fall into the mixing container. As soon as the motors complete its rotation, a motor attached to the mixer starts rotating for some time to blend all the ingredients. A solenoid valve that connects the mixing container and the dispensing cup is opened when the mixer completes it’s mixing. Then the user can collect the drink. The whole process takes a maximum time of 3 minutes approximately.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
