Abstract
The reactive infiltration of molten aluminum into a powder preform was investigated as a processing route for aluminum nitride (AlN) matrix composites. As the powder preform, titanium and boron nitride (BN) powders were blended and compacted, the infiltration occurred spontaneously at temperatures ranging from 1073 K to 1673 K. The conversion ratio of BN to TiB2 and AlN turned out to be insufficient (<0.8) at temperatures below 1273 K. The conversion ratio increased by increasing the processing temperatures, and it exceeded 0.95 at 1673 K. The conversion ratio at 1473 K was almost saturated with a 3.6 ks holding and the effect of extending the holding time was not confirmed. Decreasing the BN powder size was effective to promote the reaction between aluminum, titanium and BN. The effectiveness was particularly prominent at 1473 K in comparison with the specimen fabricated at 1673 K. The titanium powder size did not show a significant effect on the formation of AlN and TiB2. The volume fraction of AlN increased by changing the atmospheric gas from argon to nitrogen.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
