Blue-Green Light-Emitting Diodes and Violet Laser Diodes

Abstract

Short-wavelength-emitting devices, such as blue laser diodes (LDs) and light-emitting diodes (LEDs), are currently sought for a number of applications, including full-color electroluminescent displays, laser printers, read-write laser sources for high-density information storage on magnetic and optical media, and sources for undersea optical communications. For these purposes, II–VI materials such as ZnSe and SiC, and III–V-nitride semiconductors such as GaN have been investigated intensively for a long time. However it was impossible to obtain high-brightness (over 1 cd) blue LEDs and reliable LDs. Much progress has been achieved recently on green LEDs and LDs using II–VI-based materials. The short lifetimes prevent II–VI-based devices from commercialization at present. The short lifetime of these II-VI-based devices may be caused by the crystal defects at a density of 103/cm2 because one crystal defect would cause the propagation of other defects leading to failure of the devices. Another wide-bandgap material for blue LEDs is SiC. The brightness of SiC blue LEDs is only between 10 mcd and 20 mcd because of the indirect bandgap of this material.On green LEDs, the external quantum efficiency of conventional, green GaP LEDs is only 0.1% due to the indirect bandgap of this material. The peak wavelength is 555 nm (yellowish green). As another material for green emission devices, AlInGaP has been used. The present performance of green AlInGaP LEDs is an emission wavelength of 570 nm (yellowish green) and maximum external quantum efficiency of 1%.