Blue-light-enhanced avalanche photodiode with amulti-finger grating structure for fluorescence detection.

Abstract

The responsiveness of the photodetectors is critical to the accuracy of the fluorescent fiber optical temperature sensor. However, the current gain and signal-to-noise ratio (SNR) of traditional photodiodes (PDs) is low, which makes it difficult to meet the high-precision detection requirements of the system. In response to the above problems, this paper achieves a novel, to the best of our knowledge, multi-finger grating (MFG) avalanche photodiode (APD). The device combines the polysilicon gate and the space charge region formed by P+/N-Well to detect photon signals. The conversion capability of the photodetector can be significantly enhanced by the MFG structure. The principle of the device is simulated and verified by technology-computer-aided design (TCAD). The standard grating APD (SG-APD), 2-finger grating APD (2FG-APD), 3-finger grating APD (3FG-APD), and 4-finger grating APD (4FG-APD) are fabricated based on 0.18µm CMOS process. The optoelectronic detection characteristics of these devices are analyzed by establishing an optoelectronic test platform. At 480nm, the responsivity of 2FG-APD, 3FG-APD, and 4FG-APD increases by 79.3%, 96.9%, and 70.2%, respectively, compared to SG-APD (4.021A/W). The test results indicate that 3FG-APD exhibits a strong photon response in the blue light range. The device has broad application prospects in the field of fluorescence detection.