Block shear strength of cold-formed austenitic stainless steel (304 type) welded connection with base metal fracture

Abstract

In this paper, the block shear fracture behavior of base metal in austenitic stainless steel (STS304, corresponds to ASTM 304 type) fillet-welded connection has been investigated through experimental and numerical methods. Even though the block shear fracture strength of welded connection thanks to stress triaxiality effect differs from those of bolted connection under monotonic tension, block shear strength equations of welded connection with base metal fracture in the design codes are identical to those of bolted connection. Main variables are weld method (TIG and Arc welding) and weld length (transverse and longitudinal to the direction of loading). It is found from study results that welding method did not affect the strength of welded connection. Block shear strengths by current codes (KBC2016, AISC2016 and EC3 1–3) and other researchers’ proposed equations were compared with those of experimental results and finite element analysis results. Finite element analysis (FEA) model was developed based on previously test data. Also, parametric study for investigating the weld length effect on strength has been performed with the developed finite element analysis procedures. Consequently, condition of weld length and end distance perpendicular to the direction of applied force for fracture mode transition boundary from tensile fracture to block shear fracture in welded connection was investigated. In addition, block shear strength equation with modified tensile stress and shear stress factors of base metal fracture in austenitic stainless steel (STS304) welded connection is suggested considering stress triaxiality.