Abstract
The effects of co-curing blends of an unsaturated polyester (UP) with inherently fire-retardant and char-forming phenolic resoles (PH) on the thermal stability and fire retardancy of the resulting resins have been investigated. To overcome the challenge of UP/PH incompatibility, arising from their different chemical structures and curing mechanisms (radical vs. condensation), different phenolic resoles have been used: ethanol-soluble, epoxy-functionalized, and allyl-functionalized. A traditional water-based resole has also been used to give a reference non-compatible system. In Part 1 of this series of publications it was shown that the compatibility of the two resins increases with functionalization; the allyl-functionalized resole showing the best compatibility with UP. Limiting oxygen index measurements and cone calorimetry have shown that fire performance of the functionalized PH resins and their blends with UP is worse than that from the unfunctionalized PH resin, but still significantly better than that of the UP. To understand this behaviour, thermal analyses coupled with infrared spectroscopy of volatile degradation products have been used on all resins and their blends, based on which, mechanisms of their decomposition and interactions are proposed, and the effects of these on flammability are discussed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.