Blade Trailing Edge Heat Transfer

Abstract

In this article measurements of heat transfer, pressure loss, and friction factor inside simulated trailing edges of turbine blades are presented. The trailing edges considered are vented and the internal heat transfer surfaces are extended by means of staggered arrays of pillars interconnecting the blade pressure and suction surfaces. A number of pillar arrays and trailing edge configurations are considered, namely pillar pitch to diameter ratios nominally of 2, 3, and 4 and trailing edge included angles of 0, 10, 15, and 20 deg. The range of Reynolds numbers covered based on pillar diameter and maximum velocity through a row of pillars is from 104 to 2 × 105.