BiVO4/boron-doped diamond heterojunction photoanode with boron doping engineering and enhanced photoelectrocatalytic activity

Abstract

Photoelectrocatalysis is one of the most promising strategies to address ever-growing wastewater problems. A novel heterojunction photoanode formed by depositing a photocatalyst on a boron-doped diamond (BDD) layer has been considered an ideal material for the practical application of photoelectrocatalytic (PEC) degradation due to its advantages of light responsiveness, excellent charge transport, and robustness. In this study, various BiVO4/BDD heterojunction photoanodes with different diamond crystalline qualities and electrical conductivities were successfully fabricated by tuning the boron (B) doping concentration of the BDD layer. It was proposed that the charge transport efficiency of the photoanodes is promoted by optimizing the crystalline qualities and electrical conductivities of BDD films, thereby enhancing the PEC activity of the BiVO4/BDD heterojunction photoanode. Our results suggested that the electrical conductivity of BDD increased and the crystalline quality of BDD deteriorated with increasing B doping concentration. As a result, the PEC activity of the BiVO4/BDD heterojunction photoanode first increased and then decreased. The optimal PEC activity of the BiVO4/BDD heterojunction photoanode was achieved corresponding to the [B]/[C] gas ratio at 500 ppm, producing a current density of 3.3 mA/cm2 at 1.6 VRHE (the potential versus a reversible hydrogen electrode) in 0.1 M Na2SO4 under AM 1.5 irradiation, which was 1.7 times (1.9 mA/cm2) that of the photoanode with a [B]/[C] gas ratio of 3000 ppm. Meanwhile, the optimized tetracycline hydrochloride (TCH) degradation efficiency was 63.5 % within 9 min (500 ppm gas phase), which was 2.5 times (25.1 %) that of the highly doped photoanode with a [B]/[C] gas ratio of 3000 ppm. This study revealed that the excellent PEC performance benefited from the high crystalline quality and high electrical conductivity of BDD, which depended on the optimized B doping concentration. The idea of enhancing the PEC activity of the photoanode by optimizing the properties of the conductive electrode material proposed in this study provides a conceptual reference for fabricating potential high-performance photoanodes in the future.