Bisphenol A degradation by peroxymonosulfate photo-activation coupled with carbon-based cobalt ferrite nanocomposite: Performance, upgrading synergy and mechanistic pathway

Abstract

Cobalt ferrite (CoFe2O4, CF) nanoparticles were anchored on the multiwalled carbon nanotube (MWCNT) for synthesis of CF@MWCNT nanocomposite and enhancing the catalytic activity of CF. After well characterization, it was applied as a catalyst towards photo-activation peroxymonosulfate (PMS) for degradation of bisphenol A (BPA). Based on the identified intermediates, a possible degradation pathway was proposed for BPA. CF@MWCNT coupled with PMS and UV (i.e., CF@MWCNT/PMS/UV) exhibited a better performance than homogeneous UV-assisted PMS processes under Fe and Co ions. A significant synergy on the degradation of BPA was observed in the simultaneous application of catalyst, UV light and PMS. Under optimum conditions, the removal efficiencies of 100 and 72.6% were attained respectively for BPA and TOC by CF@MWCNT/PMS/UV within 60 min reaction. These efficiencies were decreased to 88 and 61% after five times use of catalyst, respectively. The leaching of metal ions dissolved from the catalyst was slight during cyclic utilization of catalyst, confirming high stability of CF@MWCNT. In this process, the participation of radical mechanisms was approximately 60%, which SO4•– and HO• species contributed as predominant oxidizing reactive species. It also showed the excellent catalytic performance towards decomposition of persulfate and hydrogen peroxide. Overall, UV-assisted PMS catalyzed by CF@MWCNT exhibited a good catalytic performance and so it can be potentially introduced as a promising method for efficient treatment of water contaminated by BPA.