Bismuth titanate thin films prepared by wet-chemical techniques: effect of sol ageing time

Abstract

In this work, layered perovskite bismuth titanate (Bi4Ti3O12) thin films were fabricated on α-alumina substrates by spin coating process. Precursor sol was prepared by sol–gel process from bismuth nitrate and titanium butoxide in concentrated acetic acid, with diethylamine as a stabilizer. Processes occurring in the precursor sol were followed in the ageing period of 20 days. Thin films prepared from the as-synthesized and aged sols are crack-free, with the thickness of ~1 μm, uniform surface texture and rounded grains having grain size in nanometer range. Sintering of thin films was performed at various temperatures, and sintered thin films exhibited dense structure, fully crystallized with typical Aurivillius phase and without any preferred orientation and impurity phase. The influence of ageing of the precursor sol on the microstructure of obtained thin films was also investigated. Direct relation between hydrodynamic diameter of precursor particles and the morphology and the grain size of the obtained films was observed.