Abstract
Bismuth oxide decorated graphene oxide (Bi2O3@GO) nanocomposites were successfully synthesized by sonochemical method followed by hydrothermal treatment. The structural, morphology/microstructure and functional groups were investigated through X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FESEM), Transmission Electron Microscopy (TEM) and Fourier Transform Infrared (FTIR) spectroscopy, respectively. In the FESEM and TEM studies, well dispersed Bi2O3 nanoparticles of size 3–5nm were found uniformly distributed throughout the surface and edges of GO sheets. The HRTEM measurements on the Bi2O3 nanoparticle decorated graphene oxide shows imaged lattice spacing of 3.2Å corresponding to (111) plane of Bi2O3 which confirms the successful synthesis of bismuth oxide decorated graphene oxide (Bi2O3@GO) nanocomposite. The synthesized nanocomposite was employed for adsorption and removal of cationic organic dyes like RhB from industrial wastewater. The effect of various parameters, viz., contact time, temperature, pH and amount of adsorbent on the adsorption capability as well as dye removal capacity of the adsorbent was studied in detail. Under optimized conditions, like, contact time (65min), amount of adsorbent (5mg), temperature (35°) and pH (4), the adsorption capacity of GO and Bi2O3@GO were recorded and the percentage of removal was found to be 64% and 80.7% for GO and Bi2O3@GO, respectively. The Bi2O3@GO nanocomposite shows higher adsorption capacity (320mg/g) as compare to only GO (224mg/g). The adsorption isotherm follows both the Temkin as well as Langmuir isotherm having heat of sorption 65.88 with Langmuir constant of 13.13 corresponding to the complete monolayer coverage of 387.44mg/g. The adsorption kinetics also follow, both pseudo first order and intraparticle diffusion model with adsorption capacity of 84.91mg/g and intra particle diffusion rate constant of 10.53mg/g min1/2 for Bi2O3@GO nanocomposites. Our results suggest that the prepared Bi2O3@GO nanocomposites possess potential application as high-performance renewable adsorbent for removal of toxic dyes from wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.