Abstract
AbstractA new biotechnological process for sulphide removal is proposed. The process is based on the oxidation of sulphide into elemental sulphur, which can be removed by sedimentation. In this study it was found that elemental sulphur and sulphate are the main oxidation products of the biological sulphide oxidation. The settling characteristics become worse as the sulphide concentration increases, due to polysulphide formation. The start‐up phase of this biological system is very short; Only four days are needed to reduce the sulphide concentration of 100 to 2 mg/l at a HRT (Residence time) of 22 minutes. Also some environmental factors were evaluated. The optimal pH is situated in the pH‐range 8.0–8.5. Significantly lower conversion rates are found at pH = 6.5 to 7.5 and pH = 9.0, while at pH = 9.5 the sulphide oxidation capacity of the system detoriates. The process temperature was 20°C, although the optimal temperature is situated in the range 25–35°C. No substrate inhibition of sulphide was found at sulphide concentrations up to 100 mg/l.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
