Abstract
Remediation of pores and cracks to prevent ingress of moisture in cement mortar can be done through microbially induced precipitation of calcium carbonate using tap water as mixing water. However, limited research is available for doing this with wastewater. This paper reports on research using treated wastewater to develop a biotechnological mortar by inoculating calcium carbonate-precipitating bacteria isolated from the waste medium. This resulted in an enhancement of 27% in compressive strength and 11% reduction in water absorption compared with a control mortar at 28 d. Advanced analysis with scanning electron microscopy, X-ray diffraction, rapid chloride permeability test and ultrasonic pulse velocity test was conducted to provide a deeper understanding of how the resulting wastewater ‘bio-mortar’ was improved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Civil Engineers - Engineering Sustainability
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.