Abstract
The present work demonstrates the applications of a nanocomposite of the cellulose polymer and ZnO nanoparticles with 1:1 weight ratio, prepared by a green assisted precipitation method for a high-performance resistive type humidity sensor. The morphology and nanostructure of prepared cellulose/ZnO composite were characterization by X-ray diffraction, Fourier transform infrared spectroscopy, field emission scanning electron microscopy and transmission electron microscopy are confirmed the decoration of ZnO nanoparticles on cellulose polymer matrix surface. The humidity sensing martials was coated onto the interdigital electrodes. The sensitivity, response/recover and stability studies performance of fabricated humidity sensors have been monitored in 5 to 98% relative humidity (%RH) at room temperature (37 °C). The response and recovery times of the fabricated sensors are observed as ≈ 26 s and ≈ 53 s respectively, and the sensitivity factor (Sf) is 2656 ± 103 Ω. Possible mechanisms of the humidity sensor based on water-induced conductivity increase are discussed. Also, the energy band of cellulose/ZnO nanocomposite was simulated by density functional theory (DFT) studies. The cellulose/ZnO nanocomposite humidity sensor has great potential for practical field applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have