Abstract
In this study, response surface methodology (RSM) was employed for the removal of methylene blue (MB) from aqueous solution using neem (Azadirachta indica) bark dust (NBD) as a bioadsorbent. The influence of various process parameters namely initial concentration (500–1,000 mg L−1), bioadsorbent dose [0.20–1.50 g (100 mL)−1], pH (5–12), and stirring rate (250–650 rpm) was taken as an input parameter. A total of 29 biosorption experimental runs were carried out employing the detailed conditions designed by RSM based on the Box–Behnken design (BBD). Response surface plots were studied to determine the interaction effects of main factors and optimum conditions of process. Regression analysis showed good fit of the experimental data to the second-order polynomial model with coefficient of determination (R 2) value of 0.9760 and model F value of 40.68. The predicted R 2 value is 0.8979. In addition, results reported in this research demonstrated the feasibility of employing NBD as bioadsorbent for MB removal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
