Abstract
Abstract Microcoleus sp. is a versatile microorganism widely available in the environment and easily culturable. Hence, there is a progressing demand for wastewater treatment using this novel biosorption medium. The design of such a treatment method may be defined as an optimisation problem of algal dose and hydraulic retention time for attaining an adequate removal efficiency of heavy metals (Cr6+, Ni2+, and Zn2+) and nutrients (PO43- and NO3-). Batch experiments on synthetic wastewater were conducted for algal doses varying from 0.5 to 25 g/L and hydraulic retention times from 1 to 7 days. Significant removal efficiencies of greater than 90% were observed for the heavy metals, 75% of PO43- removal, and no removal of NO3- was found under continuous daylight. The single-factor ANOVA test confirms the statistical significance of the varying parameters on the pollutant removal efficiency. Langmuir and Freundlich's adsorption isotherms indicate satisfactory adsorption of the contaminants about the separation factor and the adsorption intensity constant. The R2 > 0.67 and RMSE < 0.21 suggest a good fit of the modelled data. Following this, the study suggests that the use of Microcoleus sp. is a prospective bioremediation technique for industrial and municipal wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: AQUA — Water Infrastructure, Ecosystems and Society
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
