Abstract
The nickel biosorption capacity of a Streptomyces rimosus biomass treated with NaOH (0.1 M) was studied in the batch mode. After pre-treatment of biomass at the ambient temperature, optimum conditions of biosorption were found to be: a biomass particle size between 50 and 160 μm, an average saturation contact time of 2 h, a biomass concentration of 3 g L −1 and a stirring speed of 250 rpm. The external mass transfer was found to be the controlling step in the overall sorption process. The equilibrium data could be fitted by Langmuir isotherm equation. Under these optimal conditions a biosorption capacity of 32.6 mg Ni 2+/g biomass was obtained.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.