Abstract

Brewer's yeast (bottom yeast, Saccharomyces cerevisiae subsp. uvarum) cells were magnetically modified using water based magnetic fluid stabilized perchloric acid. The magnetically modified yeast cells were characterized by scanning electron microscopy (SEM) and electron spin resonance (ESR). Hg 2+ biosorption-desorption properties of magnetically modified yeast cells from synthetic solutions were utilized in batch system. The biosorption process was fast; 80% of biosorption occured within 60 min and equilibrium was achieved at around 90 min. The maximum Hg 2+ biosorption capacity was obtained to be 114.6 mg/g at 35 °C. The suitability of the Langmuir, Freundlich and Redlich-Peterson adsorption models to the equilibrium data was investigated for mercury-biosorbent system. The results were well fitted to the Langmuir isotherm. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the biosorption process. The yeast biomass can be easily regenerated by 0.1 M HNO 3 with higher effectiveness. Biosorption of heavy metal ions from artificial wastewater was also studied. The biosorption capacities are 29.9 mg/g for Cu 2+, 76.2 mg/g for Hg 2+, 14.1 mg/g for Ni 2+ and 11.8 mg/g for Zn 2+.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call