Abstract

Biosorption has been appearing as a useful alternative to conventional treatment systems for the removal of toxic metals from aqueous stream. The batch removal of chromate anions (CrO 4 2−) from wastewater under different experimental conditions using a cationic surfactant-modified lichen ( Cladonia rangiformis (L.)) was investigated in this study. Cetyl trimethyl ammonium bromide (CTAB) was used for biomass modification. The results of the experiments showed that biomass modification substantially improved the biosorption efficiency. Effects of pH, biosorption time, initial CrO 4 2− concentration, biosorbent dosage, and the existence of the surfactant on the biosorption of CrO 4 2− anions were studied. Studies up to date have shown that the biosorption efficiency of chromium increased as the pH of the solution decreased. In the present study, the removal of chromate anions from aqueous solutions at high pH values with surfactant-modified lichen was investigated. From the results of the experiments it was seen that the removal of chromate anions by modified lichen was 61% at the solution natural pH (pH 5.11) but at the same pH value the removal of chromate anions by unmodified lichen was 6%. Also concentrations ranging from 30 to 150 mg/L Cr(IV) were tested and the biosorptive removal efficiency of the metal ions from aqueous solution at high pH was achieved more than 98%.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.