Biosolids-based catalyst for oxidative desulphurization of drop-in fuels derived from waste fats

Abstract

In this work, the catalytic performance of a biosolids-based catalyst was tested in the oxidative desulphurization process of a model fuel solution containing benzothiophene ([S] of 500 ppm), as well as sulphur-rich products from a two-step thermal conversion process of brown grease to renewable hydrocarbons using biosolids as a water replacement during the hydrolysis step. The catalytic results of the biosolids-based material were compared with a classical Fenton-like reagent and a non-catalytic system. Biosolids-based catalyst outperformed the other systems at low temperature with a full desulphurization of benzothiophene solution achieved at 60 °C after 3 h and a good recyclability after four catalytic runs at 80 °C for 3 h. The desulphurization was less effective for hydrolysed fatty acids and crude pyrolysis oil derived from the conversion of brown grease to renewable hydrocarbons, which was due to the composition of the sulphur containing compounds, but still reached 87.7 ± 3.0 % and 74.7 ± 9.5 %, respectively.