Abstract
The development of an efficient test-bed for biosensors requires stable surfaces, capable of interacting with the functional groups present in bioentities. This work demonstrates the formation of highly stable electrochemically reduced graphene oxide (ERGO) thin films reproducibly on indium tin oxide (ITO)-coated glass substrates using a reliable technique through 60 s chronoamperometric reduction of a colloidal suspension maintained at neutral pH containing graphene oxide in deionized water. Structural optimization and biocompatible interactions of the resulting closely packed and uniformly distributed ERGO flakes on ITO surfaces (ERGO/ITO) are characterized using various microscopic and spectroscopic tools. Lipase enzyme is immobilized on the ERGO surface in the presence of ethyl-3-[3-(dimethylamino)propyl]carbodimide and N-hydroxysuccinimide for the detection of triglyceride in a tributyrin (TBN) solution. The ERGO/ITO surfaces prepared using the current technique indicate the noticeable detection of TBN, a source of triglycerides, at a sensitivity of 37 pA mg dL(-1) cm(-2) in the linear range from 50 to 300 mg dL(-1) with a response time of 12 s. The low apparent Michaelies-Menten constant of 0.28 mM suggests high enzyme affinity to TBN. The currently developed fast, simple, highly reproducible, and reliable technique for the formation of an ERGO electrode could be routinely utilized as a test bed for the detection of clinically active bioentities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.