Abstract

Polycyclic aromatic hydrocarbons (PAHs) are reportedly toxic, ubiquitous and organic compounds that can persist in the environment and are released largely due to the incomplete combustion of fossil fuel. There is a range of microorganisms that are capable of degrading low molecular weight PAHs, such as naphthalene; however, fewer were reported to degrade higher molecular weight PAHs. Bacillus spp. has shown to be effective in neutralizing polluted streams containing hydrocarbons. Following the growing regulatory requirement to meet the PAH specification upon disposal of contaminated soil, the following study aimed to identify potential Bacillus strains that could effectively remediate low and high molecular weight PAHs from the soil. Six potential hydrocarbon-degrading strains were formulated into two prototypes and tested for the ability to remove PAHs from industry-contaminated soil. Following the dosing of each respective soil system with prototypes 1 and 2, the samples were analyzed for PAH concentration over 11 weeks against an un-augmented control system. After 11 weeks, the control system indicated the presence of naphthalene (3.11 µg·kg−1), phenanthrene (24.47 µg·kg−1), fluoranthene (17.80 µg·kg−1) and pyrene (28.92 µg·kg−1), which illustrated the recalcitrant nature of aromatic hydrocarbons. The soil system dosed with prototype 2 was capable of completely degrading (100%) naphthalene, phenanthrene and pyrene over the experimental period. However, the accumulation of PAHs, namely phenanthrene, fluoranthene and pyrene, were observed using prototype 1. The results showed that prototype 2, consisting of a combination of Bacillus cereus and Bacillus subtilis strains, was more effective in the biodegradation of PAHs and intermediate products. Furthermore, the bio-augmented system dosed with prototype 2 showed an improvement in the overall degradation (10–50%) of PAHs, naphthalene, phenanthrene and pyrene, over the un-augmented control system. The following study demonstrates the potential of using Bacillus spp. in a bioremediation solution for sites contaminated with PAHs and informs the use of biological additives for large-scale environmental remediation.

Highlights

  • IntroductionEnvironmental damage due to oil spills has resulted in the need for sustainable strategies to rehabilitate contaminated sites

  • The Basic Local Alignment Search Tool (BLAST) search of 6 Bacillus strains selected for evaluation showed ~100% sequence similarity (16S rRNA) to known deposited sequences in the National Center for Biotechnology Information (NCBI), and their identification was confirmed at a species level to cereus, subtilis and velezensis (Table 1)

  • Prototype 2 was more effective in degrading polycyclic aromatic hydrocarbons (PAHs), including intermediate compounds, compared to prototype 1 and the un-augmented control system

Read more

Summary

Introduction

Environmental damage due to oil spills has resulted in the need for sustainable strategies to rehabilitate contaminated sites. Contamination of the environment with oil results in pollution, which affects terrestrial and marine life, commercial fisheries, recreational resources and public health. The oil can contaminate run-off water to the sewer, which results in an increase in total petroleum hydrocarbon (TPH) concentration. The concentration of petroleum hydrocarbons contaminating soil ranges between 1.2 and

Objectives
Methods
Results
Conclusion
Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.