Abstract
AbstractA feasibility study was performed on using xanthan gum and guar gum, two biopolymers that are naturally occurring and inexpensive, to stabilize mine tailings (MT). The simple fall cone method was adopted to evaluate the liquid limit and undrained shear strength of sun-dried MT mixed with xanthan gum or guar gum solutions at different concentrations. Environmental scanning electron microscopy (ESEM) imaging was also conducted to study the microstructure of the biopolymer-MT system. The results indicate that the inclusion of xanthan gum or guar gum increases both the liquid limit and the undrained shear strength of the MT, higher biopolymer concentrations leading to greater increases. The increase of the liquid limit and undrained shear strength of the MT mixed with a biopolymer solution is mainly attributable to the high viscosity of the biopolymer pore fluid and the bonding between the biopolymer and the MT particles. Guar gum is more effective than xanthan gum in increasing the liquid limit and u...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Geotechnical and Geoenvironmental Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.