Biomechanical testing of three coracoclavicular ligament reconstruction techniques with a 3D printing navigation template for clavicle-coracoid drilling.

Abstract

BackgroundThe identification and precise clavicle-coracoid drilling during coracoclavicular (CC) ligament reconstruction for acromioclavicular (AC) joint dislocation require a high level of experience and surgical skills. Furthermore, the improvement of flexible fixation, such as Endobutton techniques for CC ligament reconstructions is ongoing. We have developed a 3D printing technique navigation template for clavicle-coracoid drilling and a novel implant for the reconstruction. This study aimed to determine the efficiency of the navigation template for clavicle-coracoid drilling and to evaluate the biomechanical performance of the novel CC ligament reconstruction technique.MethodsA total of 24 fresh-frozen human cadaveric shoulders were randomly assigned to 1 of 3 reconstruction groups or a control group: TightRope, Triple Endobutton, and the Adjustable Closed-Loop Double Endobutton technique. Computed tomography scans, navigation template designs, and 3D printing were performed for the shoulders. Then, AC joint dislocation was simulated in the reconstruction groups, and 3 CC ligament reconstruction techniques were operated via the 3D printing template separately. Furthermore, biomechanical protocols including the translation test (load from 5 to 70 N) and the load-to-failure test were performed to characterize the behaviors and strengths. One-way ANOVA test analyzed differences in displacement under the translation load and the load at failure.ResultsCC ligament reconstructions were performed successfully along with the 3D printing navigation template in the 3 reconstruction groups. During the translation test, no significant difference was found in displacements among the 4 groups. Meanwhile, the mean load of all reconstruction groups at failure (Adjustable Closed-Loop Double Endobutton, 722.1620 N; TightRope, 680.4020 N; Triple Endobutton, 868.5762 N) was significantly larger than the control group (564.6264 N, P<0.05). The Triple Endobutton group had the maximum load at failure (P<0.05), however, no significant difference was noticed between the other 2 reconstruction groups (P>0.05).ConclusionsThe 3D printing navigation template may become helpful and reliable for AC joint dislocation surgery. Among the 3 CC ligament reconstruction techniques, the Triple Endobutton technique has the best strength in terms of biomechanics, while the biomechanical strength of the Adjustable Closed-Loop Double Endobutton technique is reliable in comparison with the TightRope technique.