BIOMECHANICAL STUDY OF PEDICLE SCREW FIXATION STRENGTH: ASSOCIATION OF SCREW MALPOSITION AND SCREW INSERTION TORQUE

Abstract

Pedicle screws have been widely used for the treatment of spinal diseases, but improper screw placement is not uncommon and may lead to neurovascular injuries and reduced screw fixation strength. This study aimed to investigate the feasibility of using real-time screw insertion torque monitoring to prevent screw penetration. Commercially available synthetic L4 vertebrae were divided in to seven test groups based on different screw placements. Screw insertion torque and maximal pullout strength were compared among groups. The results indicated that the insertion torque gradually increased when the screw tip was within vertebral cancellous bone without penetration. However, an instantaneous decrease of torque value was observed once the screw tip penetrated the cortex wall. When compared to the control group, higher pullout strength was found for the groups with medial cortex penetration. However, vertebrae with medial cortex penetration may lead to the concern of neurovascular damage. Meanwhile, lower pullout strength was found for the groups with lateral cortex penetration and end-plate penetration, which may lead to the concern of screw loosening. We concluded that pedicle screw penetration can be judged using real-time screw insertion torque monitoring during surgery, which may aid surgeons in avoiding neurovascular injury and reduction of screw fixation strength.