Biomechanical stresses as related to motion trajectory of lifting.

Abstract

A laboratory study was conducted to assess the effects of lift angle on biomechanical stresses to the musculoskeletal system, and in particular, on the lower back. Male subjects were required to lift four different tote boxes from the floor to a height of 0.81 m using two different lifting techniques. Maximum acceptable weights were determined using a psychophysical method. The motion trajectory of lift was studied by means of stroboscopic photography. Moments and forces at various body joints were computed using a biomechanical strength model. Maximum acceptable weights were 16% (range = 9 to 23%) greater for the free-style lifting technique as compared with the squat method of lifting. There were large differences between the maximum acceptable weights and the "maximum permissible limits" recommended by NIOSH. The results showed that the subjects pulled the load toward the body when lifting psychophysically determined maximum weights. The lift angle increased with an increase in box width. The lift angle was greater for the free-style lifting method as compared with the squat lifting technique for lifting compact loads. Lifting at an angle resulted in a decrease in moment at the elbow, shoulder, L5IS1 disc, and hips, and an increase in moment at the knees and ankles. The estimated compressive force on the lumbar spine was, on the average, 11% lower for lifting at an angle as compared with a straight vertical lift.