Biomechanical Evaluation of Internal Fixation of Pauwels Type III Femoral Neck Fractures: A Systematic Review of Various Fixation Methods.

Abstract

BackgroundThe purpose of this systematic review was to investigate various fixation methods or implants used in the treatment of Pauwels type III femoral neck fractures.MethodsPubMed Central, OVID Medline, Cochrane Collaboration Library, Web of Science, Embase, and AHRQ databases were searched to identify relevant studies published until August 2017 with English language restriction. Studies were selected on the basis of the following inclusion criteria: biomechanical study of Pauwels type III femoral neck fractures and the use of dynamic hip screw (DHS) or multiple screw fixation or other devices for fixation of the fracture.ResultsA total of 15 studies were included in the systematic review. Eight studies were conducted using cadavers, six studies using sawbones, and one using a finite element model. During the mechanical testing, each study measured mechanical stiffness, failure to cyclic loading, failure to vertical loading of each fixation device. DHS was included in 11 studies, multiple screw fixation in 10 studies, and other devices in six studies. Baitner et al. and Samsami et al. reported that the mechanical stiffness of DHS was superior to three inverted triangular screw fixation. Hawks et al. and Gumustas et al. reported that using a transverse calcar screw can withstand vertical loading better than three inverted triangular screw fixation. In addition, there were some studies where instruments such as Intertan nail, locking plate or other devices showed excellent biomechanical properties.ConclusionsThere are a variety of methods and instruments for fixation of the Pauwels type III fractures. However, it is difficult to conclude that any method is more desirable because there are advantages and disadvantages to each method. Therefore, we should pay attention to the implant choice and consider adequate weight bearing affecting the stiffness of the implant.