Abstract
BackgroundPedicle screws are widely used in fusion surgery, while screw loosening often occurrs. An auxetic structures based pedicle screw was proposed to improve the bone–screw fixation by radial expansion of the screw body under tensile force to resist pulling out. It was optimized to obtain excellent anti-pullout ability for a particular bone based on the biomechanical interaction between screw and surrounding bone. MethodsThe screw was designed based on re-entrant unit cells. The mechanical properties of it were adjusted by the wall thickness (t) and re-entrant angle (θ) of the unit cell, and characterized using finite element (FE) method. The designed screws were manufactured using 3D-printing, and Ti6Al4V as the materials. Subsequently, the pullout FE models were established, and verified by pulling the fabricated screws out of Sawbone blocks. The pulling out processes of screws from bone were simulated to explore the optimizing design of the screw. ResultsThe mechanical properties of the screw could be adjusted in a wide range. The biomechanical interaction between the screw and bone can affect the anti-pullout performance of the screw. With an identical elastic modulus (E), better auxiticity of the screw, resulted in a better anti-pullout performance; while an appropriate E is the necessary condition for its excellent anti-pullout performance for a particular bone. ConclusionAppropriate mechanical properties are necessary for the auxetic pedicle screw with excellent screw-bone fixation performance for a particular bone, which can be obtained by rationally designing the wall thickness and re-entrant angle of the unit cells.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.