Biomechanical comparison of the Lim/Tsai tendon repair with a modified method using a single looped suture.

Abstract

The Lim/Tsai tendon repair technique has been modified clinically to achieve a 6-strand repair using a single looped suture with one extratendinous knot. We compared biomechanical performance of the original and modified methods using 20 porcine flexor digitorum profundus tendons. The ultimate tensile strength, load to 2 mm gap force, mode of failure, and time taken to repair each tendon were recorded during a single cycle loading test in 10 tendons with each repair method. We found that despite having the same number of core strands, the single looped suture modified Lim/Tsai technique possessed significantly greater ultimate tensile strength and load to 2 mm gap force. Also, less repair time was required. We conclude that the modified 6-strand repair using a single looped suture has better mechanical performance than the original method. The difference likely was due to the changes in locations of the knots and subsequent load distribution during tendon loading.