Biomechanical and biological evaluations of novel BPA-free fibre-reinforced composites for biomedical applications

Abstract

This aim was to assess the biomechanical and biocompatibility properties of novel glass fibre-reinforced composites (FRCs) with a fluorinated urethane dimethacrylate (FUDMA) resin. Three ratios of FUDMA/TEGDMA (30/70 wt%, 50/50 wt%, 70/30 wt%) and two ratios of control FRCs with bis-GMA/TEGDMA (50/50 wt% and 70/30 wt%) containing long silanized E-glass fibres were prepared. Despite 70 wt% bis-GMA-FRC showed a significantly higher flexural strength (p < 0.05), 50 wt% FUDMA- and bis-GMA-FRCs were not differ from each other. The greatest surface hardness and weight increase after water storage were found in 70 wt% and 30 wt% FUDMA-FRCs, respectively. No significant difference was found in water sorption and solubility among all groups. Average surface roughness was 1.80 ± 0.05 μm, while 70 wt% FUDMA-FRC exhibited the greatest contact angle (p > 0.05). Viabilities and ALP activities of MC3TC-E1 cells in all FUDMA-FRCs were higher than bis-GMA-FRCs after 5 days. To conclude, the novel FUDMA-FRCs are potential substitutes that exhibited superior cytocompatibility properties but comparable biomechanical properties to bis-GMA-FRCs.