Abstract
Locking plates nowadays represent an important treatment in bone trauma and bone healing due to its strong biomechanical properties. The purpose of this study was to both computationally and experimentally validate a novel screw locking system by comparing it to another locking system from state-of-the-art and to apply it in an environment of a fractured mandible. FEA was used to test both systems prior to experimental tests. The systems were locked in the plate holes at 0°, 10°, 15°, and 20°. Cyclic bending tests and push-out tests were performed in order to determine the stiffness and push-out forces of both locking systems. Finally, newly designed locking system was implemented in mandibular angle fracture. Control locking system was biomechanically superior in push-out test, but with no greater significance. In contrast, the new locking system showed greater stiffness by 17.3% at the deflection angle of 20° in cyclic tests, with lower values for other deflection angles. Similar values were displayed in fractured mandible angle environment. Greater stiffness of the new locking system in cyclic loading tests, together with polyaxiallity of the new locking screw, could lead to easier application and improved biomechanical stability of the mandible angle fractures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.