Biomass pyrolysis in a circulating fluid bed reactor for the production of fuels and chemicals

Abstract

An approach for biomass flash pyrolysis in a circulating fluid bed (CFB) reactor with continuous solids regeneration is described in this study. The unit is capable of performing conventional and catalytic biomass pyrolysis with the proper solid selection. The production of improved quality liquid products in a direct step through catalytic pyrolysis is investigated in this work. Both conventional and catalytic biomass pyrolysis can be effectively performed in this CFB unit. Flash pyrolysis conditions were achieved and liquid product yields of ∼70 wt% (on biomass feed) were obtained. The effect of specific operating variables including the type of inorganic solid material and the solid/biomass ratio was established on the final liquid product quality and yield. Solid materials considered included silica sand, a commercial fluid catalytic cracking catalyst and a ZSM-5 additive. Catalytic biomass pyrolysis generally leads to the production of additional water, coke and gases compared to conventional pyrolysis. However, the obtained liquid product quality and composition is improved.