Abstract
Abstract This paper presents the results from biomass gasification tests in a pilot-scale (6.5-m tall × 0.1-m diameter) air-blown circulating fluidized bed gasifier, and compares them with model predictions. The operating temperature was maintained in the range 700–850°C, while the sawdust feed rate varied from 16 to 45 kg/h . Temperature, air ratio, suspension density, fly ash re-injection and steam injection were found to influence the composition and heating value of the product gas. Tar yield from the biomass gasification decreased exponentially with increasing operating temperature for the range studied. A non-stoichiometric equilibrium model based on direct minimization of Gibbs free energy was developed to predict the performance of the gasifier. Experimental evidence indicated that the pilot gasifier deviated from chemical equilibrium due to kinetic limitations. A phenomenological model adapted from the pure equilibrium model, incorporating experimental results regarding unconverted carbon and methane to account for non-equilibrium factors, predicts product gas compositions, heating value and cold gas efficiency in good agreement with the experimental data.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.