Abstract
In this study, the interactive effects of initial chemical oxygen demand (CODin), biomass concentration and aeration time on the performance of a lab-scale sequencing batch biofilm reactor (SBBR) treating a synthetic dairy wastewater were investigated. The experiments were conducted based on a central composite design (CCD) and analyzed using response surface methodology (RSM). The region of exploration for treatment of the synthetic dairy wastewater was taken as the area enclosed by the influent comical oxygen demand (CODin (1000, 3000 and 5000 mg/l)), biomass concentration (3000, 5000 and 7000 mg VSS/l) and aeration time (2, 8 and 18 h) boundaries. Two dependent parameters were measured or calculated as response. These parameters were total COD removal efficiency and sludge volume index (SVI). The maximum COD removal efficiencies (99.5%) were obtained at CODin, biomass concentration and aeration time of 5000 mg COD/l, 7000 mg VSS/l and 18 h, respectively. The present study provides valuable information about interrelations of quality and process parameters at different values of the operating variables.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have