Abstract
In this study, a semi-pilot scale biotrickling filter (BTF) was operated in a continuous co-current mode to remove high concentration of hydrogen sulfide (H2S) at optimum operational conditions. The early startup period of 6 days was needed, and then stable removal of H2S gas at inlet concentrations up to about 2000 ppm was successfully obtained at gas retention time (GRT) of 15 min and liquid recirculation rate (LRR) of 120 ml/min. The elimination capacities (ECs) increased linearly with increase in H2S loading rates (HLRs up to 38.5 g/m3 h), but a gradual decrease in removal efficiency was observed from a volumetric HLR of 18.1 g/m3 h. The LRR was further decreased from 120 to 30 ml/min, and the minimum liquid–gas ratio of 0.24 was found without decrease in removal efficiency. The MiSeq analysis revealed the presence of sulphur oxidizing bacteria (SOB) dominated by Acidithiobacillus caldus (>97%) at all portions of BTF.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
